The state of the hybrid system can be viewed on the multiinformation display.

System components

A Multi-information display
B Meter control switches (Click Here)

Energy monitor

The energy monitor can be used to check the vehicle drive status, hybrid system operation status and energy regeneration status.

∎ Display

Press or of the meter control switches on the steering wheel and select , and then press or to select the energy monitor display.

∎ Reading the display

The arrows will appear in accordance with the energy flow. When there is no energy flow, arrows will not be displayed.
The color of the arrows will change as follows
Green: When the hybrid battery (traction battery) is regenerated or charged.
Yellow: When the hybrid battery (traction battery) is in use.
Red: When the gasoline engine is in use. The image shows all the arrows as an example. The actual display will vary depending on conditions.

A Gasoline engine
B Hybrid battery (traction battery)
C Front tire

∎ Hybrid battery (traction battery) status

The display changes in 8 levels according to the remaining charge amount of the hybrid battery (traction battery).

• The figure shows the multi-information display as an example for explanation.
• These images are examples only, and may vary slightly from actual conditions.

A Low
B High

∎ Remaining charge amount warning of hybrid battery (traction battery)

• The buzzer sounds intermittently when the hybrid battery (traction battery) remains without charging while the shift lever is in N, or the remaining charge amount drops below a certain level. If the remaining charge amount drops further, the buzzer sounds continuously.
• When a warning message is shown on the multi-information display and the buzzer sounds, follow the instructions displayed on the screen to perform troubleshooting.